|
|
Page 1 of 2:
|
|
|
1 | 2
|
|
|
|
Used B&J 3 spd. air shifter steering wheel mount
Used 3 speed air shifter button assm. The shifter manifold is made from billet alum. and has a basic butterfly steering wheel mount. Perfect for a alcohol funny car or dragster. Mount up on the steering wheel run some air lines and you are ready to go racing. ...More Info |
|
|
Used Funny Car/Dragster steering wheel
Here is a dragster/funny car steering wheel that was bought brand new for a project but never used. It is made from 3/16 billet alum. so it is very lightweight and has been black anodized. It uses a triangle three hole mounting pattern with 10/32 bolts. Wheel measure 7in. from hub surface to end of grip surface and is 7.250 wide across the top of the grips. Steering wheel weights under one pound. ...More Info |
|
|
Used Pro Werks large air/nitrous bottle mounting bracket
Used Pro Werks large air/nitrous bottle mounting bracket. Made from billet .500 alum. this bracket mounts to a flat surface with two 1/4-20 bolts on a 2.625 inch bolt spread. This bracket works with all 5.250 dia. air or nitrous bottles. Bracket uses a handy knob that can be twisted by hand for quick removal or installation. Brackets are new and were bought for a project that was never finished so they have the normal being handled around the shop scuffs. CLAMPS ARE SOLD SEPARATE WE HAVE TWO. ...More Info |
|
|
Used Lenco large air bottle mounting bracket
Used Lenco large air bottle mounting bracket. Made from billet .625 alum. this bracket mounts to a flat surface with two 5/16-18 bolts on a two inch bolt spread. This bracket works with all 4.250 dia. air bottles. These were bought for a project that was never finished. Parts have normal laying around the shop scuffs and scratches. ...More Info |
|
|
Used Bowers 12-71 mag alch. blower
Used 12-71 mag Bowers alch. blower. This blower is dow 7 mag and includes a fresh rebuild and is set up for alch. or nitro. The blower has cast rotors and is in good shape and ready to run. The blower has steel gears and high speed bearings to provide years of service. This blower has the large buzzard top opening and the large bottom opening. ...More Info |
|
|
New PSI 14-71 hi helix w/ERD injector spacer assm.
Brand new bought for a project that went to screw blower PSI/ERD 14-71 hi helix supercharger with 5in. blower snout. This blower is brand new in the crate and includes a complete ERD injector spacer blower restraint assm. as seen in the pics below the blower. On all the PSI units, the front bearing housings are made of billet material that are press fit into the rotor case and use precision dowel pins and push the rotors back in the case allowing the air to come and load the front of the rotors providing a smoother transition of airflow and providing more boost and cooler air as the air does n ...More Info |
|
|
Used PSI 14-71 hi helix w/ERD injector spacer assm.
New ERD/PSI injector adpt. that allows one supercharger to be purchased and used in all classes from low overdrive to high overdrive classes with one change of the insert. Includes a matched blower restraint plate that matches the top of the PSI supercharger with 14.2 certification and fire proof blower restraint straps. All the guess work has been taken out of the inlet of the blower and everything is matched to give the racer the most performance out of there blower without doing lots of costly modifications. The ERD injector adpt. is to be used with the PSI roots superchargers. It is made f ...More Info |
|
|
Used SSI blower gear set
Used SSI blower gear set. These gears are made from durable heat treated steel and fit all SSI blowers 6-71 thru 16-71 with 1.125 shafts. [more] |
|
|
Used 8-71 SCS billet alum. hi helix retro w/6in. snout
Used 8-71 SCS billet alum. alch. blower. This blower has billet 120 degree rotors. This blower has a billet alum. case, bearing plates, and front cover. Blower has a 7.250in. x 4.125in. top opening but a bird or buzzard or most carbon fiber hats can be used with this blower and it has a pie retro bottom opening. This blower has been freshened up with all new stripping and seals for alch or nitro. This blower is considered a 1" to the front case if you need to order a retro plate with it. The blower has been drilled in the rear for cooling nozzles. Includes a 6.50in. blower snout assm. which wo ...More Info |
|
|
Used Taylor/PSI funny car/pro mod injector hat restraint
Used Taylor/PSI funny car/pro mod injector hat restraint. This restriant clips in the front lip of the injector and the side straps lace into the blower restraint plate making instalation a snap. Included is a piece of self adhesive velcro that will help the restraint stick to the injector so vision is never impared. Made from durable kevlar with nylon straps and steel strap adjustment buckles. ...More Info |
|
|
Used BDS 4-71 anodized sbc blower kit
If you are looking to go stealth on your blown sbc street rod here is the answer. A customer ordered this 4-71 sbc blower kit all black anodized for there set up then decided to go with another engine program so here is someone's chance to get a mean looking set up at a great price. All the parts have not been run but have the normal laying around the shop fingerprints and marks on them. The blower is a 4-71 BDS stage 2 black anodized finish with hard anodized rotors and billet bearing plates with a billet front cover set up for gas but could be used in a mild alch. application. The blower ma ...More Info |
|
|
Used polished Littlefield 6-71 air loc rotors
Used polished alum. Littlefield 6-71 alch/nitro blower. This blower was built for a class that had low overdrive rules and had to use cast rotors. The case is a Littlefield case that has a 9.00 top opening that a bug, bird or any injector with a 13.250 bolt pattern will fit. The rear of the case has cooling nozzle provsions and the bottom is pie shaped on the rear to help with blower efficency. The front and rear bearing plates are billet alum. as well is the front cover for superior strength. Now for the cool part the rotors started out as brand new standard helix BDS air loc cast rotors whic ...More Info |
|
|
Used Littlefield 12-71 hi helix magnesium
Used 12-71 Littlefield mag. alch/nitro blower. This blower has billet 120 degree rotors. This blower has a mag. case that has been painted black w/ a polished alum. front cover. Blower has a buzzard top opening and a pie bottom opening which can be used on a standard blower manifold with no set back. This blower has been freshened up with all new stripping and seals for alch or nitro. Perfect for classes with blower restrictions or smaller cubic inch engines. ...More Info |
|
|
Used PSI/JBR injector adpt. spacer
Used JBR/PSI injector blower restraint adpt. This adpt. allows the racer to take there full open blower restraint and use a JBR carbon fiber long back long front type injector. The plate is made from .250 billet alum. and has been anodized for corrosion protection. [more] |
|
|
Used 14-71 SSI F rotor hi helix w/MK 7 injector/spacer and extras
Used 14-71 SSI F2 alum. rotor alch/fuel blower. This blower has billet 120 degree rotors that have been plugged with teflon buttons in the lightning holes to put more boost into the motor and the rotors have fresh teflon and nylatron. This blower has a cast alum. case with cooling nozzles provisions in the rear. Blower has a 10.00 top opening with a cnc machined injector spacer that also is part of the 14.2 blower restraint that is included with the blower set up. This blower is perfect for pro mod or tractor pulling. This blower is in excellent condition with inlet modifications, plugged roto ...More Info |
|
|
Used 14-71 SSI F rotor hi helix w/MK 7 injector/spacer and extras
THIS IS THE SAME PARTS PACKAGE IN THE ABOVE PART NUMBER JUST MORE PICTURES OF THE PARTS THAT COME WITH THIS PACKAGE. Used 14-71 SSI F2 alum. rotor alch/fuel blower. This blower has billet 120 degree rotors that have been plugged with teflon buttons in the lightning holes to put more boost into the motor and the rotors have fresh teflon and nylatron. This blower has a cast alum. case with cooling nozzles provisions in the rear. Blower has a 10.00 top opening with a cnc machined injector spacer that also is part of the 14.2 blower restraint that is included with the blower set up. This blower is ...More Info |
|
|
Used Kuhl 14-71 hi helix polished alum.
Used 14-71 Kuhl polished alum. alch/nitro blower. This blower has billet 120 degree rotors with cooling nozzle provisions in the rear. This blower has a pressure relief valve with a oil sight glass to see the oil level. Blower has a buzzard top opening and a pie bottom opening which can be used on a standard blower manifold with no set back. This blower has been freshened up with all new stripping and seals for competition use. ...More Info |
|
|
Used SAE blower restraint top plate
Used SAE blower restraint top plate. This top plate is made from .250 thick billet alum. and fits the 15 in. top opening of a blower which will work with a buzzard or barndoor injector. [more] |
|
|
Used Littlefield mag dual gear cast rotor aclh/nitro
Used 14-71 Littlefield cast rotor magnesium case std. helix competition blower. This blower has cast 60 degree rotors with a 12.50 in. top opening that a bird will bolt right up to or most carbon fiber or buzzard catcher hats can be used with this blower and it has a 13.500 x 4.125 bottom opening that will work with most blower manifolds with no modification. This blower has been freshened up with all new stripping and seals for alch or nitro. The blower has been drilled in the rear for cooling nozzles and has billet bearing plates as well as a billet front cover and billet rear gear cover. Th ...More Info |
|
|
Used dragster/funny car oil pan diaper
Used universal lower engine containment diaper. Not sure who this is made by but if you motor decides to let a rod go this bag will help contain the oil and most of the fire in an event of an engine explosion. It has an absobent pad inside the diaper which is cleanable and replaceable. This will fit just about any combination on a race car as it has four laceable straps and buckles per side. Measurements are 24x12 on the bottom and the sides are about 8 inches high. There is no sfi tag on this diaper. ...More Info |
|
|
| Found 35 Records |
|
Page 1 of 2:
|
|
|
1 | 2
|
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
