Here is a complete 6-71 BDS kit that was bought for a rat rod that was never finished. All the parts have not been run but have the normal laying around the shop fingerprints and marks on them. The blower is a BDS stage 1 satin finish set up for gas but could be used in a mild alch. application. The blower manifold was bolted on a engine for mock up and includes a thermostat housing and is set up for street use with a spring loaded pop off valve. There is a complete 3inch 1/2 pitch drive kit which includes a short snout, upper and lower 1/2pitch pulleys, a billet steel crank hub, blower mounted idler bracket with idler pulley and mounting hardware and a 3in. wide idler pulley assm along with a new 1/2 pitch blower belt. Last but not least you get a billet 4150 dual carb adpt. and a billet single v-groove pulley to drive a altenator.
Note: This is a used item. This item might have been taken in on a trade. RBS may have inspected this item and deemed re-usable. There is no warranty expressed or implied with this item.