Telephone: (775) 461-0954
  • Search

Burn Down Breather Set Alch. Funny Car/Pro Mod 1.250" Clamshell Clamp On

*** IN STOCK SHIPS TODAY *** Anodized clamshell clamp on alch. funny car/pro mod burn down breathers. These breathers are designed to help vent the engine and take away any extra unwanted contaminates to the puke tank.

These breathers use a Wiggins clamshell clamp that you simply unsnap and it snaps back on a spring so there is no chance of the clamp coming lose during a run and very quick when it is time to remove the hoses so valve adjustment is made easy between rounds.

Breathers are .250" billet aluminum where it mounts to the valve cover with two .250" fasteners on a 3.750" bolt spread as well as four 10/24" Torx button head bolts that mount from under the valve cover to provide a leak proof seal. Breathers use a billet anodized hose coupler that is O-ringed to provide superior seal and the coupler accepts 1.250" hose.

Driver side burn down breather is straight and the passenger side is kicked out ten degrees to clear single mag drives on a Hemi engine which makes ideal for a alch. funny car or an altered. Breathers are 3.125" tall from mounting surface to the top of the hose.

Burn downs are sold in a set including two breathers, mounting hardware, O-rings and gaskets but a set of hose ends and clamps are sold separate and can be purchased under part #2600-0015D as well as #2600-0015B.

Burn down breather end and clamshell clamp are shown for picture purposes only and must be purchased separate.

For a complete kit order Qty. 1 #2600-0011B, Qty. 2 #2600-0015D and Qty. 2 #2600-0015B.

Powered By Zomix Content Management Systems copyright © 2024