Oil Filter System 1 Spin On Cleanable 5.75" Pro Series Combo

Categories:
Fuel System
Filters & Adapters
SYSTEM 1

*** IN STOCK SHIPS TODAY *** RBS is aware of the tough demands of an oil filter on a blown motor and that is why we have this cleanable Pro Series billet combo mount/oil filter that is NHRA Approved for Top Fuel Dragsters or Fuel Funny Cars. No more mounting surface O-rings between the filter and the mount. This Combo Filter and Mount comes complete with a 75 Micron element for heavyweight oil and -12 AN fittings.

It is very easy to use as there is a 13/16" hex to spin the billet cap off which is sealed by O-rings then pull the filter element out and clean in solvent or brake clean and your done, put back together give the cap a snug and your done. The beauty of having a filter such as this it is tuning tool that allows you to look for bearing material as well as a filtering device for your engines oil.

Filter housing is made from billet alum. that has been anodized for corrosion protection and filter element is made from stainless steel wire screen that has been flow tested for up to forty gallons per minute. Filter is sold for nitro/alch. applications and the filter element is 75 micron.

Filter is 3.750" in dia. and 5.750" long. Filter is perfect for up to 60 or 70 weight oil. Threads on the filter mount are 5/16-18" on a 2.00" center.

If running alch. in the tank RBS recommends Buna O-rings and if running nitro Viton O-rings are your best bet.

May We Suggest: