Telephone: 530-274-FUEL or 530-274-3835
  • Search

TBS Cast Case Blower 8-71 Gas/Alch.

Price:
-Select-
Part No.: 
Qty:
RBS on FaceBook
** IN STOCK SHIPS TODAY ** TBS 8-71 polished/anodized alum. street/competition cast case blower. Blower comes standard in a polished finish but the buyer can choose anodized black finish as an option. Rotors are two or three lobe, billet or cast alum., straight profile or sixty degree that can be hard anodized for a long lasting durable supercharger with tighter inside tolerances creating a more efficient supercharger. The blower uses double lipped Teflon seals to provide superior seal on the rotor shafts with hi-speed double row ball bearings and helical steel gears to keep the rotors in time. Billet alum. rear bearing plate, front bearing plate, and billet front gear cover offer maximum strength and gives a superior polish or sinister finish when anodized. Injectors with a 13.250" on center bolt pattern can bolt to the top of the blower as well as 4150/4500 carburetor adapters.

TBS offers the superchargers in different stages for the buyer from street to full race so read below the options and if the buyer needs help for there application RBS will be happy to help. Top opening on the blower case is 12.50" x 4.00" as is the bottom opening. Front cover has a pressure relief and a oil sight glass installed with a new drain plug that makes draining the gear case oil a simple task. Front offset blower case moves the offset of the case to the front allowing the buyer more clearance in the rear for a SBC/BBC application.

*1200-0032 8-71 Cast Case/Cast Three Lobe Rotor Stage 1 Front Offset
*1200-0032A 8-71 Cast Case/Cast Three Lobe Rotor Stage 1
*1200-0032B 8-71 Cast Case/Billet Three Lobe Rotor Stage 1
*1200-0032C 8-71 Cast Case/Billet Three Lobe Rotor Stage 1 Front Offset
*1200-0032D 8-71 Cast Case/Billet Two Lobe Rotor Stage 1
*1200-0032E 8-71 Cast Case/Billet Two Lobe Rotor Stage 1 Front Offset
Stage 1 blower is raw aluminum and no internal parts are anodized.

Stage 2 Blower is hard anodized inside the blower case, bearing plate surfaces and the complete blower rotor surface. This is great for a street application as the anodize offers corrosion protection, gives a more durable coating on the alum. for galling protection and tightens up all the clearances for better performance. Can be used on street or mild strip use.

Stage 3 Same as Stage 2 but a tip strip of nylatron is added to the top of the rotors to tighten the clearance between the case and the rotor offering better sealing and producing more boost into the buyers engine. Can be used on street or mild strip use.

Stage 4 Same as Stage 3 but strips of Teflon is added to the sides of the rotors to seal the rotors to one another so once boost is put into the intake the side Teflon strips stop the air from trying to leak back up thru the supercharger keeping the boost down in the intake and more power being made.

Recommended for alcohol or nitro use only. Picture of blower is a Stage 3 #1200-0032 with option #1000-0010, #1000-0012 and option #1000-0008.