Telephone: 530-274-FUEL or 530-274-3835
  • Search

Used Pro Mod Throttle Cable Bracket

Used Pro Mod throttle bracket is swept back at a forty five degree angle to clear a magneto that sometimes is in the way on a Hemi or possibly a racer is coming from the rear of the engine with a throttle cable giving better throttle cable geometry.

This bracket can be mounted on the bottom of most all common Enderle, JBR, CG, Faulk, Veney and PSI injectors using the industry standard two 1/4" bolts.

Bracket is made from .190" billet alum., has some nice lightening holes to keep the hot rod light weight and sweeps down seven inch's so there is plenty of material for the next buyer to make plenty of adjustments for their application. Currently there is a billet alum. cable mount that uses a small bolt with a nylock nut to lock the cable in place by turning the bolt until it locks in the cable groove but a simple change would be to purchase #2200-0020 if wanting to use a simple over center clip mount.

Note: This is a used item.  This item might have been taken in on a trade. RBS may have inspected this item and deemed re-usable. There is no warranty expressed or implied with this item.