Telephone: (775) 461-0954
  • Search

CG Composites Roots Carbon Fiber MK-5X Injector Long Tube Spread Bolt

RBS is proud to bring the racers this carbon fiber masterpiece from the CG stable. This pro mod/funny car injector is ready to rotate the earth with it's three large alum. 5.562" butterflies. You know what that means friends, more air, more fuel more horsepower, quicker E.T.'s and faster times.

Injector opening is 10.500" x 4.500" on the blower surface and the workmanship inside the injector is aero flow designed and smoothed out for better air flow into the supercharger. Injector has a 13.250" on center bolt pattern and weights eight pounds as seen in the pictures. The MK 5X design features a spread front bolt pattern to remove the bolts from the short turn air flow area inside the injector which helps decrease turbulent air and smooth the air flow into the rotors.

Injector measurements are 7.750" tall from blower surface to top of injector, from center of front bolt hole to front lip of injector is 5.00", injector width is 18.50", butterfly depth in the front of the injector is 2.50" at the top and 1.50" at the bottom.

Injector has a provision for a throttle cable bracket and a barrel valve using industry standard 1/4" mounting hardware. RBS can supply all the parts to make the injector complete at an additional cost if the racer chooses. Injector has twelve 1/8" NPT nozzle provisions with a 1/4" time-sert at the rear to mount a fuel distribution block.

Injector includes everything seen in the pictures which include injector housing, butterfly shaft and butterflies.

This injector is a special order, will take 4-6 weeks to get once ordered.

Powered By Zomix Content Management Systems copyright © 2024