Dual Regulator Assm. Co2 150/250 PSI Alum. Kit Black

Co2 pressure regulator. This regulator is made from billet alum. so it is light and allows the racer to have two different Co2 settings thru one regulator.

Bottle adpt. Made from billet heat treated steel this Co 2 air bottle adpt. allows a racer to connect a -4 female fitting to the -4 male fitting which will allow the racer a complete liquid filled gauge/dual regulator kit in a small and tidy package.
Wrench hex is 1.00" and fitting works with small or large Co 2 air bottles.

Dual regulator gauge adpt. Made from billet heat treated anodized alum. this fitting allows a racer to plumb in a liquid filled Co 2 pressure gauge inline coming off the Co 2 bottle which will allow the racer a complete liquid filled gauge/dual regulator kit in a small and tidy package.
Wrench hex is .562" on the -4 nut and .875" hex which is drilled and tapped 1/8" female pipe on two sides allowing the racer options where to stick there Co 2 pressure gauge.

Fitting includes a internal hex plated steel 1/8" pipe plug to plug off the side of the fitting the racer doesn't use.

90 degree swivel fitting. Made from heat treated plated steel this fitting adpt. allows a racer to connect a -4 female fitting to 1/8" male pipe threads which will allow the racer a complete liquid filled gauge/dual regulator kit in a small and tidy package.
Wrench hex is .562" and fitting swivels allowing the racer perfect placement of there dual regulator for plumbing purposes.

0 to 1500 PSI Co 2 pressure gauge. Keep an eye on all your air controlled functions with this handy gauge that is liquid filled so tire shake or bouncing down the road in the trailer will not effect the gauge and allow a racer to know when the bottle is getting low on Co 2.

Gauge is 1/8" male pipe thread which will screw right into #2630-0057 allowing the racer a complete gauge/dual regulator kit in a small and tidy package.

Racer can pick pressure in Regulator Pressure box. Most common on a Lenco is 150/250 and a B&J 150/400. When ordering for example post in the Regulator Pressure box #150 #250 or #150 #400 or if you need something different post it in the box and RBS will be happy to try and accommodate.