Telephone: (775) 461-0954
  • Search

LMR F-11 14-71 Blower

Price:
-Select-
Part No.: 
RBS on FaceBook

*** IN STOCK SHIPS TODAY, BLOWER IN PICTURES *** RBS HAS A #1200-0026B IN STOCK WITH HI-HELIX ROTORS AND A 7.50" SNOUT ON IT. BLOWER IS FOR HIGH OVERDRIVE WITH A 12.00" x 4.50" TOP OPENING. EXTREME PLUS HAS THE BENEFITS OF TEFLON STRIPPING IN THE BEARING PLATES TO BETTER SEAL THE BLOWER BOOST DOWN IN THE INTAKE. THERE IS ALSO A FUEL PORT ON THE BACK OF THE CASE ON THE BOTTOM SIDE. THIS FUEL PORT HELPS COOL AND SEAL THE BLOWER ROTORS. ***

RBS is proud to offer the legendary LMR F-11 supercharger line. What is a F-11 you may ask? Well it is one of the most innovative superchargers that have come out to racers in a long time.

The F-11 design brings added elements of performance and safety to the racing world. On all the LMR F-11 style units, the front bearing housings have three inches of billet material that are press fit into the rotor case and push the rotors back in the case allowing the air to come and load the front of the rotors providing a smoother transition of airflow and providing more boost and cooler air as the air does not get so beat up entering the blower.

This bearing plate design increases the strength considerably over the common dowel pinned bearing housings normal to most supercharger designs. The rear cover is also captured in the same way. This design also benefits repeatability of rotor location. As these units are overhauled, the doweled design tends to wobble out the bores and the rotors find themselves misaligned over time, which can cause supercharger malfunction.

Blower uses precision caged roller bearings in the rear and precision ball bearings in the front as well as double lipped Teflon seals for superior sealing.

This blower can be ordered in a standard 60 degree rotor or a 120 degree hi helix rotor depending on the use. RBS can help the customer choose the best supercharger for your application.

The snout is included and you get your choice of 4.00" or 5.00" depending upon your application. Blower with five inch snout weights 138 pounds.

Measurement on the 14-71 for the racer wanting to see if it will fit with firewall or windshield from center of rear blower stud hole on the 2, 4, 6, 8, side of the engine it is 10.50" to the rear bearing cap.

RBS is proud to offer the newest in F-11 rotor design to help give you the winning edge. This unit is available in a 6-71, 8-71, 10-71, 14-71, 16-71's.

Blower has 13.250" and 15.250" on center bolt patterns to work with most industry standard injectors.

Racer can pick model of supercharger from the drop down menu.

Powered By Zomix Content Management Systems copyright © 2024