Moroso SBC Drag Race Rear Sump 8.250" Alum. Oil Pan #21234

Categories:
Engine
Oil Pumps & Drives
MOROSO

*** IN STOCK SHIPS TODAY *** Moroso SBC alum. wet rear sump 8.250" deep. Perfect for drag cars that need to carry a little extra oil capacity for their hi-revving passes down the 1320. Nothing worse than almost to the lights and as the tach. is climbing the oil pressure gauge is dropping. Not with this pan, Moroso is ready for some hard hitting, record setting action.

Pan is fully tig- welded aluminum, with a fully fabricated steel windage tray that will accept a 4.250" stroke crank with steel rods. Pan features billet alum. end seals that ensure a consistent sealing surface to billet front covers and rear main caps.

Double kick-out design ensures large stroke clearance, wide main cap clearance and maximum horsepower to be gained from a full length solid louvered windage tray with main cap partitions for oil control. Oil pan measures 11.00" wide across the front and back of the pan and weights twelve pounds as seen in the pictures.

Oil pan is to be used with 168-tooth flywheel combinations and two-piece rear main seal. Oil pan will fit all pre-1985 SBC engine blocks including aftermarket Dart and Merlin.

Couple more oil pan features are an ORB magnetic drain plug, two -8 AN drain back ports, six ORB plugged holes to allow oil pan fastener installation and 1/4" NPT dipstick bung on the 1, 3, 5, 7 side of the engine.

Racer will still need to purchase an oil gasket, oil pump, oil pump pick-up, dipstick and mounting hardware to make a complete set-up.