Used steel stroker plate. This plate allows you to use a 1/2" ratchet to turn the motor over to adjust valves or get the motor up on top dead center to drop your mag or distributor in. It is made from billet steel and uses the industry standard 2.782" bolt circle with six 3/8" bolt holes. This part is almost .160" thick and may require longer blower pulley bolts. Finish is cad-plated steel and this is an older stroker plate that uses one offset bolt hole which is common on old blower drives but if being used with a newer blower snout you will have to grind or file out one bolt hole to get all six blower pulley bolt holes to line up.
Note: This is a used item. This item might have been taken in on a trade. RBS may have inspected this item and deemed re-usable. There is no warranty expressed or implied with this item.