Oil pump pressure is adjustable, pump has been inspected and looks good inside with a couple normal scuffs and tiny dings on the gears. Measuring from block surface to end of outer cap is 6.250" and from block surface to where the main flat is on the outer section cap 5.50". Pump housings are machined from billet alum. and hard anodized for wear resistance.
Fits JP-1, BAE, KB, TFX, Indy, and Mopar big blocks. Includes grade eight mounting hardware. Oil pump weights close to eight and half pounds as seen in the pictures. Oil pump has industry standard 5/16" female hex to drive the oil pump off the mag drive.
Pump is currently plumbed with a -16 to the oil pan and oil filter is bypassed with a -4 fitting to feed the rear main and a -8 to feed another part of the motor. Oil pump can be plumbed with -12 for an oil filter again if the buyer chooses.
Oil pump has been clearanced in a few spots for frame rail clearance which can be seen in the pictures on the bottom of the outer cover and on the bottom of the main body.
Note: This is a used item. This item might have been taken in on a trade. RBS may have inspected this item and deemed re-usable. There is no warranty expressed or implied with this item.