SOLD Used Pushrod 12.150" Trend H13 Solid 3/8" Ball/Cup

Part No.: 7012-0060A

MPN: QSH12.150-S7-3-5 B CUP

Out of Stock

Categories:
Engine
Previously Owned
Valve Train
PREVIOUSLY OWNED

Used 12.150" dual taper pushrod with .375" cup and .375" tip. Pushrod is made from solid H13, it is heat-treated to a hardness of 54 to 56 Rockwell then quenched and tempered to relieve the stresses. This process is followed by nitriding and after the nitride process, each pushrod is hand finished before shipment.

Pushrod measures 12.150" from end to end, subtract the cup depth 11.960" and appear to be in great shape.
Currently in stock is nine used pushrods that measures .375" up top, .440" in the center and .375" down by the tip.

Pushrods are sold each and all have been checked with no excessive run out. There are nine pushrods total.

To increase the compression strength of their pushrods for nitro and hi-revving alcohol race engines, Trend Performance has adopted a premium quality H-13 tool steel. Further, this new solid design is available for all pushrod race engines operating under extreme stresses that do not oil the rocker balls through the pushrods.

Formed from ½-inch solid bar stock and furnished with a 3/8-inch ball on the lifter end, a 3/8-inch cup on the rocker end, and a body diameter ground to 7/16 inch.

Note: This is a used item. This item might have been taken in on a trade. RBS may have inspected this item and deemed re-usable. There is no warranty expressed or implied with this item.