Tool can be used on AJPE 5 Muscle cylinder heads with all the rocker gear still installed as time is valuable so simply remove four of the rocker stand nuts spin on the nuts that come with the kit and crank down the hand knobs on the tool and it is time to get to work.
If the racer is checking spring pressure simply install the cup with the gauge crank it down with a 3/8" ratchet or if changing springs switch out the cup and crank down with a 3/8" ratchet and either process requires removing the tool or changing over to the next cylinder. Pressure gauge body swivels so it can be rotated around to clear obstacles that might be in the way.
Tool fits AJPE 5 Muscle heads with AJPE rocker assemblies. Be sure to check out part #2700-0014E cylinder head stand assm. if you are doing this on the work bench.
Tool stands is made from billet alum. that has been anodized and steel parts are nickel plated for easy clean up and a beautiful finished part that any racer will be proud to own.
Tool includes detailed instructions and eight hex stand nuts so the racer has a set for each cylinder head. Here are a few things for the racer to check off when ordering: Racer must specify dual or triple spring cup when ordering and if unsure give us your valve spring part number and we will make sure to get you the correct cup for the application.
RBS carries a full supply of rocker stud nuts that allow the racer to use the tool on multiple engines. Racer can purchase hex stand nuts to have multiple cylinder heads ready and also purchase spring cups separate if there application changes.
1.500" x 7/16" hex stand nuts fit new type AJPE Stg. Five rocker stands.
For the racer that may own a purple anodized tool you are able to purchase the #2700-0014L black anodized stands only so the tool will work with AJPE 5 Muscle heads. That right just remove the snap rings, swap out the stands and the tool is ready to go.
Cart
copyright © 2024