Valve Spring Maintenance Tool Fuel Head Hemi Gen 2

*** IN STOCK SHIPS TODAY *** RACER MUST USE 5/16" VALVE COVER STUDS *** PLEASE SPECIFY DUAL OR TRIPLE VALVE SPRING TYPE IN THE PROVIDED BOX ***

For the racer that likes to service the cylinder heads on their hot rod here is one of the best tools you can buy for todays nitro burning nostalgia engines. This valve spring maintenance tool allows the racer to change and check valve springs with simple hand tools and makes it a quick simple one person job.

Tool can be used on cylinder heads with all the rocker gear still installed as time is valuable so simply drop the tool over six of the valve cover studs, spin on the valve cover nuts and it is time to get to work. If the racer is checking spring pressure simply install the cup with the gauge crank it down with a 3/8" ratchet or if changing springs switch out the cup and crank down with a 3/8" ratchet and either process requires removing the tool or changing over to the next cylinder.

Pressure gauge body swivels so it can be rotated around to clear obstacles that might be in the way.

Tool fits BAE, AJPE or most other Fuel Head Gen 2 Hemi type nostalgia heads. If doing job on the bench be sure to check out part #2700-0036 cylinder head stand assm. if you are doing this on the work bench.

Tool stands is made from billet alum. that has been anodized and steel parts are nickel plated for easy clean up and a beautiful finished part that any racer will be proud to own.

Racer can purchase spring cups separate if their application changes.

Tool includes detailed instructions. Here are a few things for the racer to check off when ordering: Racer must specify dual or triple spring cup when ordering and if unsure give us your valve spring part number and we will make sure to get you the correct cup for the application. Heads must use 5/16" valve cover studs.